Clutch Bearings Ball Bearing
$0.00We provide clutch bearings assemblies in both metric and inch nominal series. These are corrosion resistant and perform even on high speed with ease. The clutch bearing is similar to a roller bearing, but instead of allowing the elements to roll freely in both directions the rolling elements lock when rolled the opposite direction. Clutches have three main tasks to perform overrunning, indexing and backstopping. The clutch consists of a series of cam shaped steel wedges
Each clutch is placed at an angle to permit rotation in one direction, yet provides instantaneous backstopping in the other. It offers optimal running surfaces, compensates for thermal expansion, minimum energy consumption and superior speed & load carrying ability. Clutch bearings are applied to belt pulleys and chain wheels and as simple bearing support, backstop and overrunning clutch.
Clutch Bearings Ball Bearing
$0.00We provide clutch bearings assemblies in both metric and inch nominal series. These are corrosion resistant and perform even on high speed with ease. The clutch bearing is similar to a roller bearing, but instead of allowing the elements to roll freely in both directions the rolling elements lock when rolled the opposite direction. Clutches have three main tasks to perform overrunning, indexing and backstopping. The clutch consists of a series of cam shaped steel wedges
Each clutch is placed at an angle to permit rotation in one direction, yet provides instantaneous backstopping in the other. It offers optimal running surfaces, compensates for thermal expansion, minimum energy consumption and superior speed & load carrying ability. Clutch bearings are applied to belt pulleys and chain wheels and as simple bearing support, backstop and overrunning clutch.
Clutch Bearings Ball Bearing
$0.00We provide clutch bearings assemblies in both metric and inch nominal series. These are corrosion resistant and perform even on high speed with ease. The clutch bearing is similar to a roller bearing, but instead of allowing the elements to roll freely in both directions the rolling elements lock when rolled the opposite direction. Clutches have three main tasks to perform overrunning, indexing and backstopping. The clutch consists of a series of cam shaped steel wedges
Each clutch is placed at an angle to permit rotation in one direction, yet provides instantaneous backstopping in the other. It offers optimal running surfaces, compensates for thermal expansion, minimum energy consumption and superior speed & load carrying ability. Clutch bearings are applied to belt pulleys and chain wheels and as simple bearing support, backstop and overrunning clutch.
CNC Machine BIESSE ROVER K
$0.00The innovative ATS work table boasts a universal design for superb flexibility and easy configuration.
The quick-coupling system ensures fast and easy replacement of the vacuum modules and the Uniclamps, used to lock narrow and particularly thick pieces in position.
Uniclamp clamps with pneumatic system.
Different references for the machining of multiple components.
The Pick Up station supports automatic tool-holder rack tooling.
Thanks to the 16 position tool-holder rack, tools and aggregates are always available, without the need for operator intervention when moving from one machining process to the next.
CNC Machine BIESSE ROVER K
$0.00The innovative ATS work table boasts a universal design for superb flexibility and easy configuration.
The quick-coupling system ensures fast and easy replacement of the vacuum modules and the Uniclamps, used to lock narrow and particularly thick pieces in position.
Uniclamp clamps with pneumatic system.
Different references for the machining of multiple components.
The Pick Up station supports automatic tool-holder rack tooling.
Thanks to the 16 position tool-holder rack, tools and aggregates are always available, without the need for operator intervention when moving from one machining process to the next.
CNC Machine BIESSE ROVER K
$0.00The innovative ATS work table boasts a universal design for superb flexibility and easy configuration.
The quick-coupling system ensures fast and easy replacement of the vacuum modules and the Uniclamps, used to lock narrow and particularly thick pieces in position.
Uniclamp clamps with pneumatic system.
Different references for the machining of multiple components.
The Pick Up station supports automatic tool-holder rack tooling.
Thanks to the 16 position tool-holder rack, tools and aggregates are always available, without the need for operator intervention when moving from one machining process to the next.
Cosmetic and Health Grade Sachets Packaging & Printing
$0.00Similar to foodstuff sachets, cosmetic and health-care sachets are also made of multilayer aluminum and metalized material.
Sachets are user-friendly promoted products with high popularity, fully hygienic with almost unique options because of stiff and proper cover, sealing and proper volume for different applications.
Cosmetic and Health Grade Sachets Packaging & Printing
$0.00Similar to foodstuff sachets, cosmetic and health-care sachets are also made of multilayer aluminum and metalized material.
Sachets are user-friendly promoted products with high popularity, fully hygienic with almost unique options because of stiff and proper cover, sealing and proper volume for different applications.
Cosmetic and Health Grade Sachets Packaging & Printing
$0.00Similar to foodstuff sachets, cosmetic and health-care sachets are also made of multilayer aluminum and metalized material.
Sachets are user-friendly promoted products with high popularity, fully hygienic with almost unique options because of stiff and proper cover, sealing and proper volume for different applications.
Cubic Tanks
$0.00Min Order= – pcs
Container= – ft.
The price is FOB Iran ports
The price is per pcs, Call for handling and shipping costs.
Cubic tanks are an excellent choice to store water and other polyethylene-compatible liquids. These tanks are very popular in the market due to their high durability and cost-effectiveness. Hence, with a brilliant record in production and sale of cubic tanks, we can significantly help individuals and various industries to meet their needs. You may select your desired cubic water tank in different capacities and dimensions. You can contact our support team to get professional advice to purchase a cubic polyethylene tank.
Model: –
Description : Suitable for storing food and drinking water, light, avoid transfering heat via layers, avoid the growth of algae
Company name : Tabarestan Plastic Complex
Packaging : –
Minimum order : 1
Standard : ISO 9001:2015, ISO 22000:2018
Production power : –
Cubic tanks
$0.00Model: –
Description : Suitable for storing food and drinking water, light, avoid transfering heat via layers, avoid the growth of algae
Company name : Tabarestan Plastic Complex
Packaging : –
Minimum order : 1
Standard : ISO 9001:2015, ISO 22000:2018
Production power : –
Cubic Tanks
Min Order= – pcs
container= – ft.
The price is FOB Iran ports
The price is per pcs, Call for handling and shipping costs.
Cubic tanks are an excellent choice to store water and other polyethylene-compatible liquids. These tanks are very popular in the market due to their high durability and cost-effectiveness. Hence, with a brilliant record in production and sale of cubic tanks, we can significantly help individuals and various industries to meet their needs. You may select your desired cubic water tank in different capacities and dimensions. You can contact our support team to get professional advice to purchase a cubic polyethylene tank.
Cubic tanks
$0.00Model: –
Description : Suitable for storing food and drinking water, light, avoid transfering heat via layers, avoid the growth of algae
Company name : Tabarestan Plastic Complex
Packaging : –
Minimum order : 1
Standard : ISO 9001:2015, ISO 22000:2018
Production power : –
Cylindrical Bearings Ball Bearing
$0.00The Cylindrical Bearings is installed widely for their high rotating speeds and combined radial and axial loads. It is made with precision and due emphasis is given on dimensional accuracy. Further, it has high stiffness and running accuracy. These are double low Cylindrical Bearings, which are available with integral seals and shields. Our Cylindrical Bearings are applied with grease and do not require maintenance. We see its wide application in motor, pumps and compressor industries. It has high load carrying capacity and thus allows smaller bearings that are to be used while still providing long service life.
Cylindrical Bearings Ball Bearing
$0.00The Cylindrical Bearings is installed widely for their high rotating speeds and combined radial and axial loads. It is made with precision and due emphasis is given on dimensional accuracy. Further, it has high stiffness and running accuracy. These are double low Cylindrical Bearings, which are available with integral seals and shields. Our Cylindrical Bearings are applied with grease and do not require maintenance. We see its wide application in motor, pumps and compressor industries. It has high load carrying capacity and thus allows smaller bearings that are to be used while still providing long service life.
Cylindrical Bearings Ball Bearing
$0.00The Cylindrical Bearings is installed widely for their high rotating speeds and combined radial and axial loads. It is made with precision and due emphasis is given on dimensional accuracy. Further, it has high stiffness and running accuracy. These are double low Cylindrical Bearings, which are available with integral seals and shields. Our Cylindrical Bearings are applied with grease and do not require maintenance. We see its wide application in motor, pumps and compressor industries. It has high load carrying capacity and thus allows smaller bearings that are to be used while still providing long service life.
DGS Mechanical seals for pumps
$0.00| SEAL FACE | Silicon carbide with DLC coating, Carbon graphite |
|---|---|
| SEAT | Silicon carbide with DLC coating |
| SECONDARY SEALS | FKM |
| METAL PARTS | 1.4006 or other stainless steels |
| OTHER MATERIALS ON REQUEST | Available also with EagleBurgmann DiamondFace technology |
DGS Mechanical seals for pumps
$0.00| SEAL FACE | Silicon carbide with DLC coating, Carbon graphite |
|---|---|
| SEAT | Silicon carbide with DLC coating |
| SECONDARY SEALS | FKM |
| METAL PARTS | 1.4006 or other stainless steels |
| OTHER MATERIALS ON REQUEST | Available also with EagleBurgmann DiamondFace technology |
DGS Mechanical seals for pumps
$0.00| SEAL FACE | Silicon carbide with DLC coating, Carbon graphite |
|---|---|
| SEAT | Silicon carbide with DLC coating |
| SECONDARY SEALS | FKM |
| METAL PARTS | 1.4006 or other stainless steels |
| OTHER MATERIALS ON REQUEST | Available also with EagleBurgmann DiamondFace technology |
Double Suction Pump
$0.00| Model : | |
|
Description : |
Design: Axially split, single-stage volute casing pump for horizontal or vertical installation with double- entry radial impeller, connection flanges drilled to DIN, ISO, BS or ANSI standards. |
| Company name : |
Navidsahand |
| Packaging : | |
|
Minimum order : |
1 |
| Standard : |
ISO 5199 |
| Production power : |
Double Suction Pump
$0.00| Model : | |
|
Description : |
Design: Axially split, single-stage volute casing pump for horizontal or vertical installation with double- entry radial impeller, connection flanges drilled to DIN, ISO, BS or ANSI standards. |
| Company name : |
Navidsahand |
| Packaging : | |
|
Minimum order : |
1 |
| Standard : |
ISO 5199 |
| Production power : |
Double Suction Pump
$0.00| Model : | |
|
Description : |
Design: Axially split, single-stage volute casing pump for horizontal or vertical installation with double- entry radial impeller, connection flanges drilled to DIN, ISO, BS or ANSI standards. |
| Company name : |
Navidsahand |
| Packaging : | |
|
Minimum order : |
1 |
| Standard : |
ISO 5199 |
| Production power : |
Double Suction Pump (ISO 5199)
$0.00Usages:
- Fire Fighting
- Water
Product features
Design:
- Axially split, single-stage volute casing pump for
- horizontal or vertical installation with double-
- entry radial impeller, connection flanges drilled to DIN, ISO, BS or ANSI standards.
Elecro Motor Elevator S TYPE
$0.00| Model Number | S Type |
| Phase | 3 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 400 |
| Power (W) | 25900 |
| Speed (rpm) | 1350 |
Elecro Motor Elevator S TYPE
$0.00| Model Number | S Type |
| Phase | 3 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 400 |
| Power (W) | 25900 |
| Speed (rpm) | 1350 |
Elecro Motor Elevator S TYPE
$0.00| Model Number | S Type |
| Phase | 3 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 400 |
| Power (W) | 25900 |
| Speed (rpm) | 1350 |
Electro Motor Burner Motor BU551
$0.00| Model Number | BU551 |
| Phase | 1 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (W) | 550 |
| Speed (rpm) | 1425/1725 |
Electro Motor Burner Motor BU551
$0.00| Model Number | BU551 |
| Phase | 1 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (W) | 550 |
| Speed (rpm) | 1425/1725 |
Electro Motor Burner Motor BU551
$0.00| Model Number | BU551 |
| Phase | 1 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (W) | 550 |
| Speed (rpm) | 1425/1725 |
Electro Motor BURNER MOTOR HN650
$0.00| Model Number | HN650 |
| Phase | 1 & 3 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (W) | 370-750 |
| Speed (rpm) | 2700 |
Electro Motor BURNER MOTOR HN650
$0.00| Model Number | HN650 |
| Phase | 1 & 3 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (W) | 370-750 |
| Speed (rpm) | 2700 |
Electro Motor BURNER MOTOR HN650
$0.00| Model Number | HN650 |
| Phase | 1 & 3 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (W) | 370-750 |
| Speed (rpm) | 2700 |
Electro Motor Desert Cooler EG 1-2
$0.00| Model Number | 28120 |
| Phase | 1 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (HP) | 0.5 |
| Speed (rpm) | 1425/1725 |
Electro Motor Desert Cooler EG 1-2
$0.00| Model Number | 28120 |
| Phase | 1 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (HP) | 0.5 |
| Speed (rpm) | 1425/1725 |
Electro Motor Desert Cooler EG 1-2
$0.00| Model Number | 28120 |
| Phase | 1 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (HP) | 0.5 |
| Speed (rpm) | 1425/1725 |
Electro Motor Desert Cooler EG 3-4
$0.00| Model Number | 29344 |
| Phase | 1 |
| Frequency (Hz) | 50/60 |
| Voltage (V) | 220/230 |
| Power (HP) | .75 |
| Speed (rpm) | 1425/1725 |