Showing 1–36 of 207 results

SHOW CATEGORIES
Acetylene Gas
Close

Acetylene Gas

0تومان

Pure Acetylene Gas

  1. Acetylene  is the chemical compound with the formula C2H2. It is a hydrocarbon and the simplest alkyne. This colorless gas is widely used as a fuel and a chemical building block. It is unstable in pure form and thus is usually handled as a solution. Pure acetylene is odorless, but commercial grades usually have a marked odor due to impurities.
  2. As an alkyne, acetylene is unsaturated because its two carbon atoms are bonded together in a triple bond. The carbon–carbon triple bond places all four atoms in the same straight line, with CCH bond angles of 180°. Since acetylene is a linear symmetrical molecule, it possesses the D∞h point group.
Air-Blowing-Bitumen-Bitumen-&-Tar-Product
Close

Air Blowing Bitumen Bitumen & Tar

0تومان

Production of Bitumen Product in Iran and World by Blowing Method and Straight Run Method. The Air Blowing Bitumen is Produced by Process of Vacuum Bottom (VB) and Air in the Reactor and Due to the Control of the Process Conditions, Different Grades are Produced.

Air-Blowing-Bitumen-Bitumen-&-Tar
Close

Air Blowing Bitumen- Tar

0تومان

Bitumen  production in according to three standard method (Blowing method ,Straight run method and Blending method) in Iran and other countries

The Air Blowing Bitumen is produced by process of vacuum Bottom (VB) and air in the reactor. and due to the control of the process conditions, different grades are produced.

Bitumen clasification according to various specification such as Penetration, Viscosity, Performane of bitumen in the road and ….

Iran2africa-ammonia.jpg
Close

Ammonia Gas

0تومان

Ammonia is a compound of nitrogen and hydrogen with the formula NH₃. A stable binary hydride, and the simplest pnictogen hydride, ammonia is a colourless gas with a distinct characteristic of a pungent smell

Iran2africa-ammonium chloride food grade-Picture
Close

Ammonium chloride-Ammonium chloride(NH4Cl)

0تومان

Ammonium chloride is an inorganic compound with the formula NH4Cl and a white crystalline salt that is highly soluble in water. Solutions of ammonium chloride are mildly acidic. Sal ammoniac is the name of the natural, mineralogical form of ammonium chloride. The mineral is commonly formed on burning coal dumps from the condensation of coal-derived gases. It is also found around some types of volcanic vents. It is mainly used as fertilizer and a flavoring agent in some types of licorice. It is the product of the reaction of hydrochloric acid and ammonia.

Iran2africa-ammonium chloride industrial grade.jpg
Close

Ammonium chloride( pharmaceutical grade)

0تومان
Ammonium chloride is one of the three principal components of the nitrogen cycle. Ammonium chloride administration promotes creatinine and urea clearance andinduces metabolic acidosis in mice. Ammonium chloride inhibits acidification in the endosome-lysosome system
Iran2africa-ammonium chloride food grade-Picture
Close

Ammonium chloride(food grade)

0تومان

Ammonium Chloride (NH4Cl), also known as ‘Sal ammoniac’, ‘Nushadir salt’, and is used as a food additive. Commonly used as a yeast nutrient in bread making, as excellent flavor-agent for delicious sweets, to improve the crispiness of snacks such as Indian samosas and jalebi, In baking it give cookies a very crisp texture. Ammonium chloride is also used as an expectorant in cough medicine.

Iran2africa-ammonium chloride industrial grade.jpg
Close

Ammonium chloride(industrial grade)

0تومان

Ammonium chloride, abbreviated as ammonium chloride. It refers to the ammonium salt of hydrochloric acid, which is mostly a by-product of the alkali industry. Containing 24%~26% of nitrogen, it is white or slightly yellow square or octahedral small crystal. It has two dosage forms of powder and granular. Granular ammonium chloride is not easy to absorb moisture and easy to store, while powdered ammonium chloride is used more. Basic fertilizer for the production of compound fertilizer

Iran2africa-argon.jpg
Close

ARGON Gas

0تومان

Argon is a chemical element with the symbol Ar and atomic number 18. It is in group 18 of the periodic table and is a noble gas. Argon is the third-most abundant gas in the Earth’s atmosphere, at 0.934%.

Argon-Gas
Close

Argon Gas

0تومان

Argon is a chemical element with symbol Ar and atomic number 18. It is in group 18 of the periodic table and is a noble gas.[3] Argon is the third most common gas in the Earth’s atmosphere, at 0.93% (9,300 ppm), making it approximately 23.8 times as abundant as the next most common atmospheric gas, carbon dioxide (390 ppm), and more than 500 times as abundant as the next most common noble gas, neon (18 ppm). Nearly all of this argon is radiogenic argon-40 derived from the decay of potassium-40 in the Earth’s crust. In the universe, argon-36 is by far the most common argon isotope, being the preferred argon isotope produced by stellar nucleosynthesis in supernovas.

Iran2africa-Benzene-Picture
Close

Benzene

0تومان

DESCRIPTION

Benzene (cyclohexa-1, 3) is the basis of a group of hydrocarbons referred to as “aromatics”. It is a clear colorless liquid, with a characteristic aromatic smell. Benzene is produced worldwide in substantial quantities, and because it is very easy to transport by ship, it is traded internationally.

Iran2africa-Benzene-Picture
Close

Benzene-Hydrocarbons

0تومان

Benzene is a chemical that is a colorless or light yellow liquid at room temperature. It has a sweet odor and is highly flammable. Benzene evaporates into the air very quickly. Its vapor is heavier than air and may sink into low-lying areas. Benzene dissolves only slightly in water and will float on top of water.

Iran2africa-Benzene.jpg
Close

Benzene-Hydrocarbons

0تومان

Benzene is a chemical that is a colorless or light yellow liquid at room temperature. It has a sweet odor and is highly flammable. Benzene evaporates into the air very quickly. Its vapor is heavier than air and may sink into low-lying areas. Benzene dissolves only slightly in water and will float on top of water.

Bitumen&Tar
Close

Bitumen – Tar

0تومان

The degree of penetration of bitumen provided by the company is pure petroleum bitumen, which is produced by passing hot air through the raw material of vacuum baton. Bitumen is produced from crude oil residues after breaking down and eliminating its hydrocarbons.

 

Iran2africa-BITUMEN 40-50.jpg
Close

BITUMEN 40-50 Penetration Grade

0تومان

Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and for the production of asphalt pavements with superior properties, and it’s very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.

Iran2africa-Penetration Grade 60.jpg
Close

BITUMEN 40/50 Penetration Grade

0تومان

Bitumen 40/50 is a penetration grade bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. This bitumen is petroleum grade bitumen, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. Bitumen 40/50 is applicable for the production of hot mix asphalt for bases and pavements and for road.it is used in tropical areas.

Iran2africa-BITUMEN 60-70-Picture.jpg
Close

BITUMEN 60-70 Penetration Grade

0تومان

Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and for the production of asphalt pavements with superior properties, and it’s very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.

Iran2africa-Penetration Grade 60.jpg
Close

BITUMEN 60/70 Penetration Grade

0تومان

Bitumen Penetration Grade 60/70 which is produced during the process of oxidation of vacuum bottom in distillation tower and its penetration grade is between 60 & 70. The most common usage of bitumen 60/70 is in road construction, water proofing & building construction industries and also in cutback bitumen production. This kind of bitumen is suitable to be used in mild regions.

Iran2africa-BITUMEN 85-100.jpg
Close

BITUMEN 80-100 Penetration Grade

0تومان

Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and for the production of asphalt pavements with superior properties, and it’s very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.

Iran2africa-BITUMEN 85-100.jpg
Close

BITUMEN 85-100 Penetration Grade

0تومان

Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and for the production of asphalt pavements with superior properties, and it’s very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.

Iran2africa-Penetration Grade 60.jpg
Close

BITUMEN 85/100 Penetration Grade

0تومان

Bitumen Penetration Grade 85/100 which is produced during the process of oxidation of vacuum bottom in distillation tower and its penetration grade is between 85 & 100. This bitumen manufactured from fractional/vacuum distillation of crude oil. This grade of Bitumen is mainly used in road construction, water proofing, building construction industries and also in cutback bitumen production. This kind of bitumen is suitable to use in cold regions.

Bitumen&Tar
Close

Bitumen CRS

0تومان
 Bitumen (emulsion bitumen) is obtained by mixing bitumen and water and an emulsifier.
Bitumen&Tar
Close

Bitumen CSS1

0تومان

CSS-1 emulsion bitumen is a cationic emulsion. CSS-1 bitumen emulsion is usually made by passing a mixture of hot bitumen and water phase between a rotating disk, cone or wheel and a stator. Asphalt CSS1 emulsion is a cation retardant bitumen emulsion containing 57% black bitumen and is made exactly according to ASTM D 2397M-13 standard.

Iran2africa-Bitumen Emulsion.jpg
Close

Bitumen Emulsion-Bitumen & Tar

0تومان

Bitumen emulsions are basically an O/W – Oil on Water solution – A dispersion of bitumen particles on water phase, stabilized with the addition of surfactants – Surface active agents – or most commonly known as emulsifiers. They are primarily used for tack coats for use in between hot mix asphalt layers and prime coats for thin hot mix surfacing layers or a chip seal pavements, other cold mixed asphalt and maintenance binder .

Bitumen emulsions are divided into three categories:

* Anionic with negatively charged globules
* Cationic with positively charged globules
* Non-ionic with neutral globules.

Base on the time of setting after spraying, Bitumen emulsions classification as Quick Set (QS), Rapild set (RS), Medium set (MS) and Slow set(SS)

Bitumen-Emulsion-Bitumen-&-Tar-Product
Close

Bitumen Emulsion|Bitumen & Tar

0تومان

Bitumen Emulsions are Basically an O/W – Oil on Water Solution – A Dispersion of Bitumen Particles on Water, Stabilized with the Addition of Surfactants – Surface Active Agents – or Most Commonly known as Emulsifiers, that Will Permit the Bitumen to De Diluted in Water. They are Primarily Used for Tack Coats for use in Between Hot Mix Asphalt Lyers and Prime Coats for Thin Hot Mix Surfacing Layers or a Chip Seal Pavements.

Bitumen&Tar
Close

Bitumen MC

0تومان

Liquid bitumen refers to bitumen that is the result of mixing bitumen with a lubricant (hydrocarbon or water). Ordinary and pure bitumens, such as 60-70 bitumens, are solid in ambient conditions and temperatures, and in order to use them, they must be heated to become liquid, but in many cases, it is not possible to use heat, or it is not economical, or heat. Causes decomposition of bitumen (burning bitumen) and it is not possible to use it cold. In these cases, liquid bitumen is used.

Bitumen&Tar
Close

Bitumen SC

0تومان

This bitumen is black and is produced under ASTM D 2026M-15 standard.

Bitumen&Tar
Close

Bitumen VG

0تومان

According to zinc testers (or viscosity), it means: the penetration of a standard needle with a certain shape in millimeters under the effect of a load of 100 grams in 5 seconds in bitumen Which takes place at a temperature of 25 ° C. The obtained number indicates the permeability of bitumen

Feedstock-Composition
Close

Butane Specification

0تومان
Capacity 0.38 MTPA
Composition
Butane Content 95 liquid volume % (min.)
Pentane and heavier 1.0 mole % (max.)
Quality
Vapor pressure at 100 ºF 70 psig (max.)
Volatile residue temp. at 95% evaporation 36 ˚F (max.)
Corrosion, copper strip No. 1
Impurities
Total sulfur 0.001 wt % (max.)
Hydrogen Sulfide negative
Iran2africa-butane.jpg
Close

Butane-Hydrocarbons

0تومان

Butane or n-butane is an alkane with the formula C₄H₁₀. Butane is a gas at room temperature and atmospheric pressure. Butane is a highly flammable, colorless, easily liquefied gas that quickly vaporizes at room temperature. Butane is used as fuel and also as raw material in production of olefins.

Butterfly handle Gas Ball Valve
Close

Butterfly handle Gas Ball Valve

0تومان
Model : Butterfly handle Gas Ball Valve
Company name : Iran Gas Valve
Packaging :
Minimum order : 1
Standard :
Production power :
Iran2africa-Butterfly handle Gas Ball Valve.jpg
Close

Butterfly handle Gas Ball Valve Gas equipment

0تومان
Model : Butterfly
Company name : Iran Gas Valve
Packaging :
Minimum order : 1
Standard :
Production power :
Carbon dioxide Gas
Close

Carbon dioxide Gas

0تومان

Carbon dioxide (CO2) is a nonflammable, colorless, odorless gas. It is found in air at concentration of about 0.03%. Carbon dioxide may exist simultaneously as a solid, liquid, and gas at a temperature of -56.6˚C and a pressure of 60.4 psig. At a temperature of -79˚C and atmospheric pressure, carbon dioxide solidifies forming “dry ice” at density of 97.4 pounds per cubic foot. Because of its low concentration in the atmosphere, air is not a suitable feedstock for carbon dioxide production. Rather, CO2 is obtained from by-product streams from various manufacturing processes. Bulk quantities of carbon dioxide are usually stored and shipped as liquid under elevated pressure and refrigeration.

Blanketing and purging of tanks and reactors. It is also used as shielding gas in the arc welding process. It is the source of the bubbles in soft drinks and other carbonated beverages. It is used to fill certain types of fire extinguishers that rely on its inert properties, densities, and low temperature when released from high-pressure storage.In addition to its “inert” properties, carbon dioxide, as dry ice, is used to freeze a variety of foods.

Carbon-monoxide-Gas
Close

Carbon monoxide (CO) Gas

0تومان

Carbon monoxide (CO) gas is formed from the combination of a carbon atom with an oxygen atom. Not only flammable, it is also very hazardous since it is very toxic and odorless. It cannot sustain life and is produced, among other things, from incomplete combustion due to lack of oxygen. It can therefore cause domestic accidents if heating systems are poorly maintained. It is produced on a large scale in industry, in combination with hydrogen, by reforming hydrocarbons, generally natural gas. It is used in large quantities to produce various intermediary organic chemicals, such as acetic acids, isocyanates, formic acid, and also certain polymers such as polycarbonates and polyketones.

Iran2africa-carbon monoxide.jpg
Close

Carbon Monoxide Gas

0تومان

The Co unit production capacity is 140 kt/y of Carbon Monoxide,the feed of which is natural gas received from the National Iranian Gas Company at the rate of 87927 T/Y. The feed is mixed with steam after desulphurization and flow through the pre reformer at which higher hydrocarbons are broken to methane,CO,CO2 and Hydrogen and then passes through the reformer where sysngas is formed from the endothermic reaction of methane with steam .The reformer outlet steam is cooled to condensate and separate water ,then its CO2 content is separated by amine solution and returned to the reformer and discharged H2&CO are separated in a cold box to produce pure carbon monoxide product.

Iran2africa-CAUSTIC-SODA
Close

Caustic soda-Noah

0تومان

Sodium hydroxide (sodium hydroxide), caustic soda (caustic soda), or caustic soda with the chemical formula of Noah, which is a solid, white substance with a melting point of 1390 ° C and a density of 2 to 13. Arax Shimi Industrial Group, using the latest technology in the world, operates its products with professional packaging and offers you a competitive price.