Copper sections
$0.00USAGE
Copper sections
$0.00USAGE
Copper sections
$0.00USAGE
Copper Sheet and strip
$0.00CSP is the most reputable name in manufacturing and supplying outstanding quality copper and copper alloy sheets in Iran. High-quality raw materials are used in our manufacturing plant for fabricating excellent performing copper products. The wide range of copper products offered by CSP includes copper and copper alloy sheet & plate. The wide range of copper sheets is used at large q uantities in diverse industrial segments for different applications.
Copper Sheet and strip
$0.00CSP is the most reputable name in manufacturing and supplying outstanding quality copper and copper alloy sheets in Iran. High-quality raw materials are used in our manufacturing plant for fabricating excellent performing copper products.
The wide range of copper products offered by CSP includes copper and copper alloy sheet & plate.
The wide range of copper sheets is used at large q uantities in diverse industrial segments for different applications.
USAGE
TPC:
These copper sheets & plates have excellent electrical and thermal conductivity, and are used mainly in electrical appliances.
DLP-DHP:
Good workability, draw-ability and weldability along with high thermal conductivity are the main characteristics of this category of copper sheets, which are used i n HVAC (heating, ventilation and air conditioning) systems.
Cu-Sn:
This category of products is suitable for cooling system (i.e. automobile radiator). With 0.1-0.18 percent of Tin it has a good consistency up to 300° C.
Note: Other grades of copper alloys are available upon request.
Copper Sheet and strip
$0.00CSP is the most reputable name in manufacturing and supplying outstanding quality copper and copper alloy sheets in Iran. High-quality raw materials are used in our manufacturing plant for fabricating excellent performing copper products. The wide range of copper products offered by CSP includes copper and copper alloy sheet & plate. The wide range of copper sheets is used at large q uantities in diverse industrial segments for different applications.
Copper Sheet and strip
$0.00CSP is the most reputable name in manufacturing and supplying outstanding quality copper and copper alloy sheets in Iran. High-quality raw materials are used in our manufacturing plant for fabricating excellent performing copper products.
The wide range of copper products offered by CSP includes copper and copper alloy sheet & plate.
The wide range of copper sheets is used at large q uantities in diverse industrial segments for different applications.
USAGE
TPC:
These copper sheets & plates have excellent electrical and thermal conductivity, and are used mainly in electrical appliances.
DLP-DHP:
Good workability, draw-ability and weldability along with high thermal conductivity are the main characteristics of this category of copper sheets, which are used i n HVAC (heating, ventilation and air conditioning) systems.
Cu-Sn:
This category of products is suitable for cooling system (i.e. automobile radiator). With 0.1-0.18 percent of Tin it has a good consistency up to 300° C.
Note: Other grades of copper alloys are available upon request.
Copper Sheet and strip
$0.00CSP is the most reputable name in manufacturing and supplying outstanding quality copper and copper alloy sheets in Iran. High-quality raw materials are used in our manufacturing plant for fabricating excellent performing copper products. The wide range of copper products offered by CSP includes copper and copper alloy sheet & plate. The wide range of copper sheets is used at large q uantities in diverse industrial segments for different applications.
Copper Sheet and strip
$0.00CSP is the most reputable name in manufacturing and supplying outstanding quality copper and copper alloy sheets in Iran. High-quality raw materials are used in our manufacturing plant for fabricating excellent performing copper products.
The wide range of copper products offered by CSP includes copper and copper alloy sheet & plate.
The wide range of copper sheets is used at large q uantities in diverse industrial segments for different applications.
USAGE
TPC:
These copper sheets & plates have excellent electrical and thermal conductivity, and are used mainly in electrical appliances.
DLP-DHP:
Good workability, draw-ability and weldability along with high thermal conductivity are the main characteristics of this category of copper sheets, which are used i n HVAC (heating, ventilation and air conditioning) systems.
Cu-Sn:
This category of products is suitable for cooling system (i.e. automobile radiator). With 0.1-0.18 percent of Tin it has a good consistency up to 300° C.
Note: Other grades of copper alloys are available upon request.
Corner and Studs
$0.00Introduction to corner profiles and studs
The two most widely used products in the construction industry are angles and studs, which differ greatly in appearance and application in the industry.
In the industry, steel profiles are L-shaped. Corner is one of the most important sections used in the building and construction industry which is widely used in steel frames and structures. According to the design presented by the engineers, the corners are used as branches and crushed. Corner joints are used for simple joints in structures. Types of joint joints are: die joint joint, seat joint joint, semi-joint joint, joint joint, etc.
The profile is a steel cross-section made of carbon steel rolling shafts with a horizontal die and two U-shaped vertical wings with rounded curved interior angles. This profile falls into the open profiles group. It is widely used in industrial and construction applications.
Pars Profile Group currently manufactures studs from 300 to 600 mm 2 to 10 mm thick, 6 and 12 m long and 2 to 10 mm 6 mm long 10 mm long studs with the highest quality of the finest raw materials. And markets domestic and foreign markets.
It also informs esteemed customers that the company carries a strip from 0.8mm to 10mm on the order of dear customers.
Corner and Studs
$0.00Introduction to corner profiles and studs
The two most widely used products in the construction industry are angles and studs, which differ greatly in appearance and application in the industry.
In the industry, steel profiles are L-shaped. Corner is one of the most important sections used in the building and construction industry which is widely used in steel frames and structures. According to the design presented by the engineers, the corners are used as branches and crushed. Corner joints are used for simple joints in structures. Types of joint joints are: die joint joint, seat joint joint, semi-joint joint, joint joint, etc.
The profile is a steel cross-section made of carbon steel rolling shafts with a horizontal die and two U-shaped vertical wings with rounded curved interior angles. This profile falls into the open profiles group. It is widely used in industrial and construction applications.
Pars Profile Group currently manufactures studs from 300 to 600 mm 2 to 10 mm thick, 6 and 12 m long and 2 to 10 mm 6 mm long 10 mm long studs with the highest quality of the finest raw materials. And markets domestic and foreign markets.
It also informs esteemed customers that the company carries a strip from 0.8mm to 10mm on the order of dear customers.
Corner and Studs
$0.00Introduction to corner profiles and studs
The two most widely used products in the construction industry are angles and studs, which differ greatly in appearance and application in the industry.
In the industry, steel profiles are L-shaped. Corner is one of the most important sections used in the building and construction industry which is widely used in steel frames and structures. According to the design presented by the engineers, the corners are used as branches and crushed. Corner joints are used for simple joints in structures. Types of joint joints are: die joint joint, seat joint joint, semi-joint joint, joint joint, etc.
The profile is a steel cross-section made of carbon steel rolling shafts with a horizontal die and two U-shaped vertical wings with rounded curved interior angles. This profile falls into the open profiles group. It is widely used in industrial and construction applications.
Pars Profile Group currently manufactures studs from 300 to 600 mm 2 to 10 mm thick, 6 and 12 m long and 2 to 10 mm 6 mm long 10 mm long studs with the highest quality of the finest raw materials. And markets domestic and foreign markets.
It also informs esteemed customers that the company carries a strip from 0.8mm to 10mm on the order of dear customers.
Corner and Studs Metals & Minerals
$0.00The two most widely used products in the construction industry are angles and studs, which differ greatly in appearance and application in the industry.
In the industry, steel profiles are L-shaped. Corner is one of the most important sections used in the building and construction industry which is widely used in steel frames and structures. According to the design presented by the engineers, the corners are used as branches and crushed. Corner joints are used for simple joints in structures. Types of joint joints are: die joint joint, seat joint joint, semi-joint joint, joint joint, etc.
Corner and Studs Metals & Minerals
$0.00The two most widely used products in the construction industry are angles and studs, which differ greatly in appearance and application in the industry.
In the industry, steel profiles are L-shaped. Corner is one of the most important sections used in the building and construction industry which is widely used in steel frames and structures. According to the design presented by the engineers, the corners are used as branches and crushed. Corner joints are used for simple joints in structures. Types of joint joints are: die joint joint, seat joint joint, semi-joint joint, joint joint, etc.
Corner and Studs Metals & Minerals
$0.00The two most widely used products in the construction industry are angles and studs, which differ greatly in appearance and application in the industry.
In the industry, steel profiles are L-shaped. Corner is one of the most important sections used in the building and construction industry which is widely used in steel frames and structures. According to the design presented by the engineers, the corners are used as branches and crushed. Corner joints are used for simple joints in structures. Types of joint joints are: die joint joint, seat joint joint, semi-joint joint, joint joint, etc.
Door And Window Profile Metals & Minerals
$0.00Introduction to door and window profiles
The complete set of profiles required for the construction of metal doors and windows of buildings is manufactured and supplied with good quality and excellent dimensional accuracy.
Door & Window Profiles are widely used in the construction industry and are supplied to the domestic and overseas markets at the world class factory of Pars Profiles with the best quality and in different dimensions according to customer’s order.
Door And Window Profile Metals & Minerals
$0.00Introduction to door and window profiles
The complete set of profiles required for the construction of metal doors and windows of buildings is manufactured and supplied with good quality and excellent dimensional accuracy.
Door & Window Profiles are widely used in the construction industry and are supplied to the domestic and overseas markets at the world class factory of Pars Profiles with the best quality and in different dimensions according to customer’s order.
Door And Window Profile Metals & Minerals
$0.00Introduction to door and window profiles
The complete set of profiles required for the construction of metal doors and windows of buildings is manufactured and supplied with good quality and excellent dimensional accuracy.
Door & Window Profiles are widely used in the construction industry and are supplied to the domestic and overseas markets at the world class factory of Pars Profiles with the best quality and in different dimensions according to customer’s order.
