Aircraft Cabin Illumination (LED)
0,00 €The advantages of LED lamps application are as follow:
- Being economical and having higher efficiency in the rate of 30% to m40% more than compact fluorescent lamp (CFL) fluorescent lamps, incandescent lamps and high-intensity discharge lamps(HID)
- Higher light Emission in a favorable direction
- Longer lifetime than other light sources
- Not used if mercury and other poisonous materials exist
- Resistance to impact and mechanical shocks
- Reducing cost and ease of replacement
- Compactness and capability of installation on PCB
- Possibility of adjustment of the produced light lumen by electricity current
- Higher continuous application time
- The guarantee for Fokker 100 is six months or 500 hr. And for MD series, Airbus A320 and A300- 600 is twelve months or 3200 hr
Display System
0,00 €NCD_301 Model Navnet is designed in a compact case to monitor and control all navigation systems with I/O data ports in serial and network protocols. The device is designed to be portable and to have easy mobility and mountable on a static stand. Integrated powerful processor and display hardware help to use it in all systems for processing and monitoring devices.
- Easy to install on the dashboard, stands, and consoles.
- Supporting USB Flash Memory to save and record data.
- Input /output data ports in serial RS232 and RS422, LAN, USB2–3 protocols are available.
- Full isolation for all serial ports with separate serial rounds.
- Support OS Windows 7,8,10 in x86-x64 and Linux.
- Saving and recording data from multi-connected devices.
- Environment IEC60945 standard.
Civil Tire (LT & TB)
0,00 €- DT2001: Has a long operation, torsional strength, and good braking on most roads for vehicles LT.
- DT2002: Designed for use in the automotive drive shaft LT, has a high resistance to abrasion, harpist power, braking, and excellent pull.
- DT2005: Designed for use in steering and drive axle vehicles TB.
- DT2010: Designed to fit the steering axis and long-lived and resistant TB drive vehicles over rough roads.
Corpse Transport Conex
0,00 €Refrigerating unit: Unit with refrigerating capability from +10 to -20 degrees with an alpha two-stroke motor and or similar type with the capability of ceiling installation
Spring Check Valve PN 10/16
0,00 €- The valve is used as a one-way flow valve to prevent backflow on industrial and construction installations
- Utilized in all water line systems and all non-corrosive liquids with a maximum temperature of 80°c
- Body made of ductile iron (GJS400) EN 1563 (DIN 1693) even in PN 10 valves.
- The wedge of ductile iron (GJS400) encapsulated with vulcanized EPDM resistant against friction and hammer effects
- Flange face to face dimension according to EN 558 (DIN 3202-P1-F6)
- Flange drilled to EN 1092-P2 (DIN 2501)
- Opening range proportional to water pressure
- Minimum opening differential pressure 0.1 bar
- Minimum closing differential pressure 0.5 bar
- Suitable for installing in the vertical position
- Fast closing of the wedge with spring pressure and preventing the return of water (suitable) in pumping stations where the return of water causes impact and is harmful to the system.
- When installing the valve, pay great attention to the direction of the arrow on the body
Hydraulic Actuator
0,00 €Hydraulic actuators are used in X-Mas tree assemblies to open gate valves by applying hydraulic pressure. As the spiral springs are pushed in actuators in the valve opening process, while the hydraulic pressure is removed from the actuator cylinder, the valve starts to close. The manufactured varieties are actuators with 5” and 7” pistons.
A.4 Insulating Glass
0,00 €To reduce heat, gain, or loss through the glass, two or more lines of glass are used to create dead air space that inhibits the transmission of heat and cold between the lines of glass. Insulated glass is typically fabricated using very special sealants and a metal spacer at the perimeter of the glass- creating a hermetically sealed insulated glass (IG) unit. Glass used in IG units can be annealed, heat-strengthened or fully tempered.
A.1 Laminated Safety Glass (Multi-Layer)
0,00 €The laminate glass utilized in sloped, overhead, and other applications presents numerous design and safety challenges. If the glass breaks, the glazing system must protect against the falling glass. Additionally, an understanding of the unique thermal, solar, and ultraviolet characteristics of sloped and overhead glazing is required to avoid occupant discomfort and poor energy efficiency, and reduce potential damage to household furnishings. This Product Application Note is intended to provide an overview of the range of options that exist to incorporate laminated glass in overhead and sloped applications.
Ferro Phosphorus
0,00 €Application
Ferro phosphorus is mainly used as an alloying constituent and deoxidizer of special steel in the metallurgical industry. It is used to produce phosphate products in the chemical industry. It is also used as filling material in the metallic coating. Adding Ferro phosphorus to an alloy prevents oxidation and the later rusting of metals.
