Split Phase Evaporative Cooler Electro Motors

0,00 

Product Specification

TypeFrame sizeOutput PowerOutput PowerRated VoltageSpeed in rated loadRated CurrentRated TorquePower factorStarting / Rated CurrentStarting / Rated TorqueBreak down / Rated TorqueInertia momentPoles
SP 56-4/6560.187/0.0621/4 / 1/122201425/9502.86/1.051.25/0.620.655/0.576.181.922.32/2.820.0018831
SP 56-4/6560.25/0.071/3 / 1/102201425/9503.2/2.11.67/0.750.69/0.5315.61.622.15/2.690.0020341
SP 56-4/6560.37/0.1241/2 / 1/62201425/9504.47/2.52.5/1.250.721/0.6166.21.521.92/2.080.0024881

Straight Connector

0,00 

The street connector is used for direct connection (axis to axis) of two micro ducts. This interface provides a fast, easy and secure connection that also has the ability to seal the micro document.

Sub Duct

0,00 

These pipes are fitted to install light cables into communication channels and are produced in 3 and 4 plies. They are black high-density polyethylene (HDPE) pipes and should be packed in the length of 255 m, dia. 120 cm, using winding m/cs in a fully circular form.

Teleco Mobile

0,00 

Telecom Equipped Vehicle

The Telecom Equipped Vehicle has been designed and manufactured by Paya Communication Industries with the goal of achieving the ability to quickly transport a Telecommunication facility base from one place to another in critical or catastrophic situations.

With its high transportability, and a very short restart and up time of under 3 minutes, this product has made its way through a vast set of applications, not only in cases of unexpected catastrophe such as earthquakes, but also in cases when a burst of high traffic service is demanded in a specific physical area.

The TelecoMobile basically consists of a shelter with two separate compartments, in one of which the outdoor equipment racks will racks will be installed, and the other accommodating a telescopic tower and power generator. The shelter may be installed on any type of truck and is equipped with four manual jacks on its sides.

The TelecoMobile´s outstanding features include high safety measures, not requiring a grade-1 driving license for driving it according to its lower weight, and the optimum amount of space occupied by the product.

Telecom Equipped Trailer

0,00 

Cell on Wheel

The Telecom Equipped Trailer has been designed and manufactured by Paya Communication Industries with the goal of achieving the ability to quickly transport a Telecommunications facility base from one place to another in critical or catastrophic situations.

This Mobile Communication Site is manufactured in form of a towable trailer consisting of four main parts; Balancing System, Chassis & Suspension System, Cabin set and Tower.

Telecom Mobile Shelter

0,00 

Cell on Leg

Portable telecom mobile shelter is composed of one outdoor Shelter with external dimensions of 2.2× 2.3 m with one main door for the equipment room and two roller doors for access to mast and other external component, 18 m telescopic mast equipped with folding feeder collector, Automatic diesel generator with the additional fuel tank, Air conditioning system and other required equipment’s, loaded and unloaded on the trailer easily by 8 internal hydraulic jacks without any need to crane.

Telecom Shelters

0,00 

The basic structure of the shelter consists of four main columns joined with four side walls.

The side walls are Argon-welded to the roof panel in the top, and to the floor panel in the bottom side.

In order to provide adjustable height for shelter installation, six adjustable base units each with four bolting holes are mounted under the floor panel, to be used for bolting the shelter to the ground.

Eight lifting hooks are also available on the top and bottom panels of the shelter to facilitate transport and installation process.

Ultimate security & safety measures have been integrated into the shelter design, providing it with a full anti-theft structure with at least 20 years of active lifespan.

Telecom Tower

0,00 

 Cell on Wheel

The telecommunication mobile site has been designed and manufactured by paya Communication industries in order to quickly transport and set up a telecommunication facility base in critical or catastrophic situations.

The telecommunication mobile site consists of five main sections:

  • Trailer chassis and suspension system
  • Balancing system
  • Cabin
  • Power generator set
  • Telescopic tower

Tetra LED (i series) Outdoor Lighting

0,00 
Technical Data
electrical characteristics
parameter30W
nominal input voltage and frequency (V-AC/Hz)230/50
input voltage and frequency range (V-AC/Hz)220- 240 / 50 – 60
nominal input power w30
Nominal input current a@v0.145@230
power factor0.9<
led module operating voltage v dc264
total harmonic distortion thd45%>
led module typeIntegrated
class of protection against electric shock 230vI

Three Phase Electro Motors With Energy Grade Of IE2

0,00 

Dimension (Foot mounting)

Frame No.IECHDHCBBAKKBABAAAZHAACQILEEHDHGALKFD
80194805010025101416012535961115668.52764021.525619
90L215905612530101418214043.3961217570.53255019M82732824
100L2331006314035121720016040961219473.53666022M103140828
112M2561127014035121723519045961321776.52003846022M103140828
132M291132891784012172602164411614255902584868028M1241561038
160L340160108254501521315254641161630395.534562911036M1645801242

Three-Phase Electro Motors With Cast-Iron Frame

0,00 

Dimension-Frame Size 100-160 (Foot mounting )

 

FRAME
No.
IEC
DFGADHEHELXIQZACHALKAAAABKBKBABcHHD
I00L28831MIO2260367Pq1619767109197144047160200171240.514063100268
112L28831MIO2260386Pql620070109221154061190235171240.514070112291.5
132M381041M122880487.5Pq2l25884139257155662216260171248.517889132337.5
160L421245M1636110629Pq29345111170303208074254320211456254108160391